1U (EFAP-M251 PSU) (D:14.4")(Micro-ATX / ITX)(Rackmount Chassis)(4 Bay Case) NEW

Description

PLinkUSA / RackBuy
1U (Micro-ATX / ITX) (14.4" Deep) Aluminum Front Rackmount Chassis
(2 x 3.5" HDDs + 2 x 2.5" HDDs Bay) (Customize 1U IO shield Available)
ETASIS Low Cost 1U Flex ATX 250W Power Supply
IPC-1004M
_
EFAP-M251
Brand NEW
IPC-1004M
_
EFAP-M251
(
PLinkUSA / RackBuy
)
IPC-1004M (
PLinkUSA / RackBuy
)
All Available 1U Back I/O shield list
1U Micro-ATX / ITX 2x3.5" + 2 x 2.5" HDD
Support MB size:
a
. 9.6" x 9.6" Micro-ATX MB
b
. 6.7" x 6.7" Mini ITX MB
Note: Rail Set and CPU System on the pictures does not included
Compatible with 9.6"x9.6" Micro-ATX MB structure, and meet the newest LGA1366 and LGA775 dual core or quad core processor platform, the 1U IPC-1004M chassis designed by aluminum extrusion front bezel with invisible intake air vent holes, that can keep away overheating from this 1U server platform. It supports two 3.5" and two free optional 2.5" HDD capacity as well as two USB 2.0 ports at the front side which can make your storage and master or slave OS system to be the best system construction. As regards to the power supply assembly, it supports standard 1U Flex-ATX 400W / 250W power supply installation that saves much cost for your system integration. Also it provides I/O front access or traditional I/O rear access solution which is without extra mounting bracket needed,
PRODUCT TECHNICAL SPECIFICATIONS
Totally 4 drive bay: 2 x 3.5" and 2 x 2.5" HDDs bay
Drive bay equipped with anti-vibration function
Two USB 2.0 ports at front bezel
aluminum extrusion front bezel with invisible intake air vent holes
Both I/O front-access or I/O rear-access compatible
Four 40mm x 20mm
YATE LOON D40SM-12C
intake fans toward to the CPU location
All in one fan wire PCB to keep fast system maintenance
Support 9.6"x9.6" standard Micro-ATX MB
(6.7" x 6.7" Mini ITX MB)
Support standard 1U FlexATX 500W - 250W PSU (max. psu depth: 150mm) (4Pin + 24Pin Extend Cable for ITX mother board ) (250W Power supply included)
Support 1 slot full high expansion card (max.
170mm~245mm
long) (Riser card not included)
Standard paint: black
Various
PLinkUSA / RackBuy 1U
I/O shield
available (option, increasing more items daily)
Chassis dimension: 19" x 1U x 366mm (14.4" deep)
Efficiency: 80%@ 230VAC input and typical load
Input Current: 6-3A
Input Frequency: 47-63 Hz
Input Range: 100 to 240 VAC±10%
Input Voltage: 100-240VAC
Note: The +5 & +3.3 Volt combined total output shall not exceed 90W. Maximum continues total DC output power shall not exceed 250W
Operating Humidity: 20 to 90%
Operating Temperature: 0 to 40ºC
Output Load +12V1: Max Load 13A. Min Load 2A.
Output Load +3.3V: Max Load 12A. Min Load 2A
Output Load +5V: Max Load 12A. Min Load 1A
Output Load +5Vsb: Max Load 2A. Min Load 0A.
Output Load -12V: Max Load 0.5A. Min Load 0.1A.
Output Voltage +12V1: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +3.3V: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage +5V: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage +5VSB: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage -12V: Regulation Load ±10%, Regulation Cross ±10%, Regulation Line ±2%, Output Ripple & Noise Max. 120mV.
Power Factor: 0.90 minimum
No Power Cord
SATA x 2
Dimensions (WxHxD) 81.5mm x 40.5mm x 150mm
Form Factor: Flex ATX Power Supply Unit (PSU)
Output: 250W
Datasheet
United States (48 States) Please check with "Shipping and Payments"
Canada (Buyer is responsibility to pay any duty and brokerage fee)
IPC-1004M (
PLinkUSA / RackBuy
)
Note: Rail Set and CPU System on the pictures does not included